She's got two blue eyes - a lot of frame overo pintos have a white face and if the marking is wide enough to catch the eye sockets, they'll have full or partial blue eyes. I think she looks very happy and friendly.
The very next day, I painted two more, with spots instead of patches.
I've had a couple of these dressage horses in my body box for a while (they were in the blind bags the first year I got a cheap whole boxful to work my way through!), but hadn't had any nice ideas for colours on them lately, then I happened to see a photo of a spotted horse competing in dressage and realised that would be the perfect fresh idea to give one of my horses a very different paintjob!
I decided to go with Knabstrupper as they're the most famous pure spotted warmblood breed, rather than yet another partbred for my collection! With this new nationality in mind, I've named him Harecroft Heroisk - 'Heroic' in Danish.
One of those moulds which has two good sides, as it's posed moving on a perfectly straight line it photographs just as well from either side.
Now, the next one has a bit of a problem. I painted him working on my lap, as usual, and when I'd finished I was really pleased with how he'd turned out, didn't notice anything wrong at all. The following morning, he still looked lovely, and I was happily satisfied with my work - til I got him outside for a photo.
See the issue?
Handsome enough horse, pretty colour, no massive errors in the paintwork, no missed bits, no stray fingerprints or stuck fluff... whatever could have made me say 'Oh, no!' out loud at him?
Look at that back foot! His back leg nearest the camera is so warped, his foot is hovering far above the ground when the pose means it should be touching down, and supporting his weight.
It's because I don't have a desk or table or workbench - if I'd stood the mould on any flat surface before painting, or even during the boring basecoating layers, I'd have noticed this and been able to fix it first!
So okay, I think, I'll just take him inside, use boiling hot water to bend the leg, hope hope hope the paint doesn't peel off with the wet or the heat, then retake his picture.
The paint's fine, but the plastic doesn't soften. Not even a little bit.
I try reboiling the water and putting him in again.
I try pouring it directly on the leg.
I try leaving him in longer.
I try more force.
I try everything, but the leg just will not bend.
This body was made from a different plastic, completely clear, sold in
this set designed for making decorator pieces, like stained glass or rainbow or however you wanted to colour them. They paint up just fine with normal model paints, too, and I've had several of them for turning into ordinary horse-coloured customs in the past, without ever realising that the different plastic can't be softened with heat in the normal way!
So I was left with only one alternative to fix him - first, my little hacksaw to cut the leg almost all the way through, trying not to scratch up the paint anywhere else. Then I wedged the gap open the right amount with a piece of compacted metal foil superglued in, and used Milliput filler to smooth over the edges, with a slight overlap. Then once it had dried hard, I repainted that little section carefully, trying to match the previous day's paintwork enough that the patching won't be obvious.
And then he was back out for another photoshoot...
I'm much happier with him now, I liked the way his colour turned out anyway, and now he doesn't have a mistake in him I can feel pleased with the finished custom!
I took more photos the second time round, so you get to see some extra angles now!
I've chosen the name Campéon ('Champion') for him, and I'm going to have him as a historical breed on my site, one of the Iberian spotted horses from the past, probably a Spanish Jennet - the extinct kind from old Europe, not the current re-creation project of named crossbreeds in the Americas.
The next project was one where I foresaw the potential for problems...
I'd got one of these gloss finish Fighting Stallions in my body box, and wasn't sure how well I'd get on with painting over the top of the gloss. Not just cos it's shiny and paint may not stick, but also the clear gloss layer is quite thick, and might've settled into the fine detail of the mould, making it look blunt and blobby once painted with colour over the top of that.
But it turns out it's just fine to paint over the gloss, I had no issues with the paint failing to cover well, or rubbing off with layering or handling, and the detail's not obscured at all, so all's well!
I'd had some reference photos bookmarked since a previous sabino custom a while back, and decided to go with
this horse's colour for him - although I didn't copy exactly, more took the general idea of where the white was than trying to recreate every patch and speckle as a portrait, the one in the pictures had this interesting marking on one foreleg, with white across the knee above a solid black leg, so I just had to include that!
The real horse he was inspired by is used as an example on a couple of pages about the Barb breed from North Africa, but I think they've got their sources muddled and picked an incorrect picture, as I've found photos uploaded to Flickr by someone who photographed this exact same horse, and they're captioned as the Wilbur-Cruce breeding line of Spanish Barb horses (which is an American breed, also called the Spanish Mustang, descendants of the horses taken there by the colonists).
Later in the month, I painted a few more customs, and because I haven't been keeping up with the blog very promptly, they all get to share this one post.
First up, a dunalino - this is what happens when you get the dun gene working on a palomino coat; the golden colour gains a dorsal stripe, darker points including dark ear tips, and sometimes leg barring and a darker shoulder too.
Here is
the reference photo I used, he's the classic photo example used when dunalino is listed or explained!
I used one of the new moulds from my box of anniversary Stablemates - the older G2 Appaloosa/QH sculpt is just as nice but I've painted a lot of them and only a couple of the Mini Smart Chic Olena. So he got to be a colour I've never painted before, on a fresh new mould too.
I really do like how he turned out, especially the shading on his shoulder, and the colour was fun to mix - warmer than the buckskins I did recently, but not as coppery-bright as a palomino can be without the dun adjustment!
His dorsal stripe, which annoyingly isn't at all obvious from the side, yet it's one of the most important parts of the paintjob! I'm just glad to have ticked this colour off my list, it's fascinating how horse colours combine and vary depending on the various dilution factors, and dun plus cream was one I'd wanted to tackle for ages!
Next up, the results of hours reading and research - I wanted to know what other breeds the new Mini Connemara mould would be best suited for.
I've already painted one as the Connemara it was sculpted for, one as my own pony (Welsh x New Forest, looking more like this sculpt than anything else on the market!), and the Sable Island Pony Breyer once released it as themselves.
But there's a lot of pony breeds out there in the world, and I'm especially fond of the native and feral types rather than the cross-bred showring types, so I sat with my books and referenced Wikipedia and various breed websites, and came up with a shortlist of ponies which matched both the breed type & conformation of the sculpt, and the free, feral attitude in the pose.
So which breed stood out as best suited, and one I'd most like to add to my collection?
The Pottok, from the Basque region of France and Spain.
These ponies are rather like the 'mountain and moorland' natives I'm so fond of in the UK - ancient ancestry, hardy, thrive on the roughest of land, can manage just fine as feral herds doing normal horse things in the wild, but can be brought in to a domestic environment and loved just as much as any other pony when tamed and trained.
They also come in lots of good colours to paint, with pinto being notably common, so my first Pottok is a seal brown pinto mare! Well over 50% of the reference photos I've seen have been flashy tobiano patched bays, chestnuts, browns, and blacks.
I hadn't realised how good this mould would look in a patchy coat, I think cos I'd only seen solid colours so far I'd not even considered it before, but it really does suit it - especially this slightly dirty unpolished coat, I gave her grubby heels and a bit of mud on the knees and hocks, like she's a proper outdoors pony and never gets bathed or shampooed!
Looking very happy frolicking in the spring field. I may well set aside another of the Connemara bodies to paint her a companion, it wouldn't be fair to have only one of the breed in my entire herd!
And the other side, because the markings are never symmetrical on a pinto, so each side will have different shapes.
The final custom of this whole March batch is a portrait of a very famous racehorse, Tiger Roll. He's so well-known in the UK and Ireland that many people who've never watched a horse race have heard of him, while anyone who does watch racing has ended up quite fond of his sweet little face, and admiring his big achievements. He's one who's attracted so many supporters and fans that he gets referred to as 'the People's Horse'.
There's a lot of biographical videos, compilations showing all his races, and even a couple of full documentaries about him, over on Youtube if you have the time, but
here's a nice short summary telling his life story while visiting him at home.
When he finished his last ever race, and did his final lap of honour in front of a cheering crowd at the Cheltenham Festival, I just had to paint his miniature - I think I always knew I would, I just wanted to see him retire safe and sound first!
His colour is much redder than a lot of bay horses, here's a photo of
the real one to compare - it's a very deep, bright bay with a lot of red tones rather than dark browns and blacks, so he looks quite different to the other racehorse portraits I've done.
The big star on his forehead - in later races he wore a black visor to help him concentrate his attention forward and you couldn't see this, but up to and including his Grand National win, it helped make him easy to identify in a crowded race. His only other marking is a little white patch on his shoulder, which I spotted in a video of him being tacked up - under his saddle pad you wouldn't know it was there.
I think the mould looks better from the other side, the eye is rounder and happier-looking when he's facing left, but his plaits show more on this side. I had to cut away the sculpted loose mane and replace it with Milliput in these little rolled-up braid blobs. I wish more of the famous horses I wanted to paint could run with loose manes, but so many of them seem to have needed plaiting! I also gave him bigger hooves, and a slightly different profile as the original face had too much of a dished nose.
All in all, I'm happy with my month's worth of customs, but already plotting what breeds and colours will be next!
